***  SETUP LOGFILE ***

Filename:        S7WSILOG.TXT
Setup Source Version:   K03.01.00.05_11.01.00.04
SetupMasterFrame Name:   Product_Masterframe
Install Start:   3-6-2007, 15:28:18

    ProductName: 'SIMATIC S7-PLCSIM'
    Release: 'V05.04.00.00_04.25.00.01'
    Physical memory [MB]: '2046'
    Free virtual memory [MB]: '2177'
    Property 'Installed'; ''
    Property 'REINSTALLMODE'; ''
    SharedPath: 'C:\Siemens\Common\'
    Property 'DATABASE'; 'C:\DOCUME~1\ww\CONFIG~1\Temp\eaad2.msi'
    Property 'OriginalDatabase'; '\\perseo\F\SIMATIC Software\S7-Plcsim\DISK1\Setup.msi'
    REBOOTFILE= 
    COMMANDLINE= -OF:C:\DOCUME~1\ww\CONFIG~1\Temp\OPFILE.TXT
       Setup startet with parameterfile (OF-file).
         (PR)<= SetupMode = Batch
         (PR)<= InstType = PROFESSIONAL
         (PR)<= JumpOverParam = 1
         (OF)<= SetupSucceeded = 0
         (OF)<= AuthorizationDone = 1
         (OF)<= RebootRequested = 0
    
       read Properties from (OF-file): C:\DOCUME~1\ww\CONFIG~1\Temp\OPFILE.TXT
         (PR)<= SetupLanguage = D
         (PR)<= LanguagesToInstall = ABCDE
         (PR)<= StartLanguage = D
         (PR)<= NameOfUser = VIOLET
         (PR)<= NameOfCompany = VIOLET REINFORCEMENT S. de R.L
         (PR)<= ID empty
         (PR)<= DestinationDrive = C
         (PR)<= DestinationPath = \Archivos de programa\Siemens\Plcsim
         (PR)<= CommonDrive = C
         (PR)<= LicenseSource = A
         (PR)<= LicenseDestination = C
         (PR)<= LicenseRequested = 0
         (PR)<= LicenseManagerHandling = 0
         (PR)<= NoOScheck = 0
         (PR)<= RSInstallVersion empty
    


Init global functions
SetMSISource: New install
Stream out ini file

    In Path_SetInstallDir_from_OPFile
    Destination Path Read from OPFile \Archivos de programa\Siemens\Plcsim does not exist
    DestinationDrive read from OPFIle C is writeable. Dialog SetupType will not be displayed
    DestinationDrive from OPFile \Archivos de programa\Siemens\Plcsim Path set as INSTALLDIR


 ReadInstalledVersionSettings
AUTSW Key: SOFTWARE\Siemens\AUTSW\PLCSim
Open AUTSW Key failed, Product not installed

UserInfo from installed version: 
 Username:  Company: Serial Number: 
No Language selected: select all 7 languages
+ Select Language 1
+ Select Language 2
+ Select Language 3
+ Select Language 4
+ Select Language 5
+ Select Language 6
+ Select Language 7

Set Directories

Get COMMONDIR from INSTALLDIR
CommonDir found in Registry
Set COMMONDIR to C:\Siemens\Common\
Actual ConnPath: C:\Siemens\Documentacin\
Actual StartEntry: Documentacin
Set MANUALCONNDIR to C:\Siemens\Documentacin\
Set MANUALSTARTENTRY to Documentacin
Set MANUALSTARTDIR to C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Documentacin
Actual ConnPath: C:\Siemens\Indicaciones relativas al producto\
Actual StartEntry: Indicaciones relativas al producto
Set READMECONNDIR to C:\Siemens\Indicaciones relativas al producto\
Set READMESTARTENTRY to Indicaciones relativas al producto
Set READMESTARTDIR to C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Indicaciones relativas al producto
Set SIEMENSMENUFOLDER to: C:\Documents and Settings\All Users\Men Inicio\
Set Directories End


write needed licenses into the ListBox_Table
licenses' installation is parametered by the RahmenSetup
    
    Installation Mode
    Table ADSDialogs created
    InstallationMode: Installation, Dialog InstallWelcome added to ADSDialogs table
    InstallationMode: Installation, Dialog ShowReadme added to ADSDialogs table
    InstallationMode: Installation, Dialog DLG_InstallationRequirements added to ADSDialogs table
    InstallationMode: Installation, Dialog LicenseAgreement added to ADSDialogs table
    InstallationMode: Installation, Dialog CustomerInformation added to ADSDialogs table
    InstallationMode: Installation, Dialog SetupType added to ADSDialogs table
    InstallationMode: Installation, Dialog DLG_ProductLanguage added to ADSDialogs table
    InstallationMode: Installation, Dialog CustomSetup added to ADSDialogs table
    InstallationMode: Installation, Dialog DLG_Autorisation1 added to ADSDialogs table
    InstallationMode: Installation, Dialog ReadyToInstall added to ADSDialogs table
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: InstallWelcome. Next selected
    DialogIndex of next dialog: 1
    Dialog InstallWelcome will not be displayed, reason: Batch Mode
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: ShowReadme. Next selected
    DialogIndex of next dialog: 2
    Dialog ShowReadme will not be displayed, reason: Batch Mode
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: DLG_InstallationRequirements. Next selected
    DialogIndex of next dialog: 3
    start function Dlg_PrepareInstallationRequirementsDlg

    Test suppositions
    Found Operating System: 
       VersionNT = 501
       ServicePackLevel = 1
       NTProductType = 1
    OperatingSystem condition string to check: ( (VersionNT=500)AND (ServicePackLevel>=4 ) ) OR (( (VersionNT=501) AND (ServicePackLevel>=1 ) )) OR ((VersionNT=502)) OR ((VersionNT=600))
    Operating System OK
    Installed Internet Explorer Build: 62800 Needed Version: 6
    Internet Explorer OK
    product is not installed
    Overinstallation OK
    Installed type OK

Check existing rename.
    PendingFileRenameOperations exists.
test for running applications:
    ApllicationNames: S7TGTOPX.EXE;S7WSVAPX.EXE;S7WSAAPX.EXE
    CheckForRunningTasks S7TGTOPX.EXE;S7WSVAPX.EXE;S7WSAAPX.EXE
    CheckForRunningTasks: WNT
     Test running Apllication : C:\Siemens\SIMATIC_NCM\S7BIN\S7tgtopx.exe
     Test running Apllication : C:\Siemens\SIMATIC_NCM\S7BIN\S7tgtopx.exe
     Test running Apllication : C:\Siemens\SIMATIC_NCM\S7BIN\S7tgtopx.exe
    Supposition: check Conditions
    Dialog DLG_InstallationRequirements will not be displayed, reason: Batch ModeNo errors or warnings found
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: LicenseAgreement. Next selected
    DialogIndex of next dialog: 4
    Dialog LicenseAgreement will not be displayed, reason: Batch Mode
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: CustomerInformation. Next selected
    DialogIndex of next dialog: 5
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: SetupType. Next selected
    DialogIndex of next dialog: 6
    Dialog SetupType will not be displayed, reason: Batch Mode
    User choose Setupmode Normal
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: DLG_ProductLanguage. Next selected
    DialogIndex of next dialog: 7
    Setup started in Batch mode, or after a Reboot, read languages from input file
    Dialog DLG_ProductLanguage will not be displayed, reason: Batch ModeSetupMode = Batch or Reboot. At least one language selected.
    Selected Startlanguage: SPANISH
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: CustomSetup. Next selected
    DialogIndex of next dialog: 8
    Dialog CustomSetup will not be displayed, reason: Batch ModeBatch ModeSetupMode = Batch  and Update Mode =   and MaintenanceMode = 
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: DLG_Autorisation1. Next selected
    DialogIndex of next dialog: 9
    Dialog DLG_Autorisation1 will not be displayed, reason: Batch ModeLIC_CALLDIALOG = 0
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: ReadyToInstall. Next selected
    DialogIndex of next dialog: 10
    Dialog ReadyToInstall will not be displayed, reason: Batch Mode

Free Space on local drives:
	Total Size on "C:\": 40007729152 bytes (38154 MB)	Free space: 3360702464  bytes (3205 MB)
	Total Size on "D:\": 40007729152 bytes (38154 MB)	Free space: 33286729728  bytes (31744 MB)

Used folders:
	"INSTALLDIR": C:\Archivos de programa\Siemens\Plcsim\
MainProd: 
MainProd: STEP7
	"MAIN_STEP7_PATH": C:\Siemens\SIMATIC_NCM\
MainProd: MAIN_STEP7_PATH
MainProd: STEP7_LITE
	"MAIN_STEP7_LITE_PATH": D:\
	"COMMONDIR": C:\Siemens\Common\
	"WindowsFolder": C:\WINDOWS\
	"TempFolder": C:\DOCUME~1\ww\CONFIG~1\Temp\
	"ProgramFilesFolder": C:\Archivos de programa\


_ADS_initSuite
Ini File not found, extract
Windows Suite: Embedded
Windows Suite: not Embedded
    
    ************
    
    ProductName: 'SIMATIC S7-PLCSIM'
    Release: 'V05.04.00.00_04.25.00.01'
    Physical memory [MB]: '2046'
    Free virtual memory [MB]: '2163'
    Property 'Installed'; ''
    Property 'REINSTALLMODE'; ''
    SharedPath: 'C:\Siemens\Common\'
    Default Destination: 'C:\Archivos de programa\Siemens\Plcsim\'
    Property 'DATABASE'; 'C:\WINDOWS\Installer\22b90.msi'
    Property 'OriginalDatabase'; '\\perseo\F\SIMATIC Software\S7-Plcsim\DISK1\Setup.msi'
    REBOOTFILE= 
    COMMANDLINE= -OF:C:\DOCUME~1\ww\CONFIG~1\Temp\OPFILE.TXT
       Setup startet with parameterfile (OF-file).
         (OF)<= SetupSucceeded = 0
         (OF)<= AuthorizationDone = 1
         (OF)<= RebootRequested = 0
    
       read Properties from (OF-file): C:\DOCUME~1\ww\CONFIG~1\Temp\OPFILE.TXT
         (PR)<= ID empty
         (PR)<= LicenseRequested = 0
         (PR)<= LicenseManagerHandling = 0
         (PR)<= NoOScheck = 0
         (PR)<= RSInstallVersion empty
    
Stream out ini file

    Function DetermineShortCutValues
    Language ID: 1034

Set Directories

Get COMMONDIR from INSTALLDIR
CommonDir found in Registry
Set COMMONDIR to C:\Siemens\Common\
Actual ConnPath: C:\Siemens\Documentacin\
Actual StartEntry: Documentacin
Set MANUALCONNDIR to C:\Siemens\Documentacin\
Set MANUALSTARTENTRY to Documentacin
Set MANUALSTARTDIR to C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Documentacin
Actual ConnPath: C:\Siemens\Indicaciones relativas al producto\
Actual StartEntry: Indicaciones relativas al producto
Set READMECONNDIR to C:\Siemens\Indicaciones relativas al producto\
Set READMESTARTENTRY to Indicaciones relativas al producto
Set READMESTARTDIR to C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Indicaciones relativas al producto
Set SIEMENSMENUFOLDER to: C:\Documents and Settings\All Users\Men Inicio\
Set Directories End

    Set Properties for Directories whithout slash
    Function DeleteShortCutsLangUnused
    Language ID: 1034
    
    Start TestSuppositionsExecute

    Test suppositions
    Found Operating System: 
       VersionNT = 501
       ServicePackLevel = 1
       NTProductType = 1
    OperatingSystem condition string to check: ( (VersionNT=500)AND (ServicePackLevel>=4 ) ) OR (( (VersionNT=501) AND (ServicePackLevel>=1 ) )) OR ((VersionNT=502)) OR ((VersionNT=600))
    Operating System OK
    Installed Internet Explorer Build: 62800 Needed Version: 6
    Internet Explorer OK
    product is not installed
    Overinstallation OK
    Installed type OK

Check existing rename.
    PendingFileRenameOperations exists.
test for running applications:
    ApllicationNames: S7TGTOPX.EXE;S7WSVAPX.EXE;S7WSAAPX.EXE
    CheckForRunningTasks S7TGTOPX.EXE;S7WSVAPX.EXE;S7WSAAPX.EXE
    CheckForRunningTasks: WNT
     Test running Apllication : C:\Siemens\SIMATIC_NCM\S7BIN\S7tgtopx.exe
     Test running Apllication : C:\Siemens\SIMATIC_NCM\S7BIN\S7tgtopx.exe
     Test running Apllication : C:\Siemens\SIMATIC_NCM\S7BIN\S7tgtopx.exe
    Supposition: check Conditions
    
    TestSuppositionsExecute, Errors : 0, Warnings: 0

Select language features
    Selected Startlanguage: SPANISH
Citamisfile: C:\WINDOWS\\citamis.str
Eintrag in Citamisfile: 
Product SIMATIC S7-PLCSIM Professional     Version: V5.4     Release: V05.04.00.00_04.25.00.01;    03-06-2007;15:28:22

    Run StartApplBefore

StartApplBefore
    Application to start: , StartAt = DRM
    Application to start: , StartAt = 


[CompSetup Pre-Deinstall]: Collect and prepare Deinstallation of component setups (for update):
Performing Scan Components...
SourceDir: \\perseo\F\SIMATIC Software\S7-Plcsim\DISK1\
 ProductCode Client: {B440401C-4804-4F2D-998C-ACF5FC83DA5F}
 SetupLanguage of client: 1034
Property REINSTALL: 
Property REINSTALLMODE: 
Property ADS_OLDDB: 
 
Found Component: Simatic_Device_Drivers
 Now read IniFile :\\perseo\F\SIMATIC Software\S7-Plcsim\DISK1\Simatic_Device_Drivers\Version.ini
 Msi component detected (to install): simatic device drivers.msi
 

Performing Deinstall Components...
 Preparing Deinstall Component: S7DOS
 IsInstalled: 2, MsiCompInstalled: -1
(InstalledVers >= ToInstallVers ;;; bOverWriteSameRel nicht gesetzt)
 Deinstall NOT executed:
  Newer version (K07.01.02.00_01.01.00.01) found installed than version of actual setup: (V07.00.00.00_01.10.00.01)
[CompSetup Pre-Deinstall]: -- End of section



Prepare UnzipFile: write informations for installation to ini-file
Prepare UnzipFiles End

Init AUTSW Structure
    AUTSW Key Name:PLCSim
    AUTSW Corr:V5.4.0.0
    AUTSW Release:V05.04.00.00_04.25.00.01
    AUTSW TechnVersion:V5.4.0.0
    AUTSW Version:5.4
    AUTSW VersionString:V5.4
    AUTSW ProdCopyright:1997-2007
    AUTSW MainFile:[INSTALLDIR]s7wsi\S7wsaapx.exe
    AUTSW Path:C:\Archivos de programa\Siemens\Plcsim\
    AUTSW ProdGroup:S7
    AUTSW ProdName:S7-PLCSIM Professional Edition 2006 SR3
    AUTSW ProdType:PROFESSIONAL
    AUTSW RegPath:SIEMENS\STEP7\2.0\APPLICATIONS\S7WSAAPX
__________________________________
Process Before DataMove
    Change Attribut

UnzipFiles
UnzipFiles End


Create AUTSW Key
Save actual AUTSW-Informations for Rollback
    AUTSW-Key Allready exists, save actual Informations for Rollback

Write AUTSW-Information to Registry
    SharedPath already exists in Registry :C:\Siemens\Common\
Change UninstallString
    Write DisplayName: SIMATIC S7-PLCSIM V5.4 Professional Edition 2006 SR3  
__________________________________
Process After DataMove
    Change Attribut
    
    Zip_DeleteSamples
    Reading from section UNZIP

Create language folder for documentation shortcuts
    ReadmeConnDir: C:\Siemens\Indicaciones relativas al producto\
    ReadmeStartDir: C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Indicaciones relativas al producto
    Write ReadmeConnPath to Registry
    Write ReadmeStartEntry to Registry: Indicaciones relativas al producto
    Add Shortcut to Readme Folder: Deutsch
    Add Shortcut to Readme Folder: English
    Add Shortcut to Readme Folder: Franais
    Add Shortcut to Readme Folder: Espaol
    Add Shortcut to Readme Folder: Italiano
    ManualConnDir: C:\Siemens\Documentacin\
    ManualStartDir: C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Documentacin
    Write ManualConnPath to Registry
    Write ManualStartEntry to Registry: Documentacin
    Add Shortcut to Documentation Folder: Deutsch
    Add Shortcut to Documentation Folder: English
    Add Shortcut to Documentation Folder: Franais
    Add Shortcut to Documentation Folder: Espaol
    Add Shortcut to Documentation Folder: Italiano
Change Permissions
Change Permissions in registry
Change Permission: [SOFTWARE\Siemens]: USERS RWX
Change Permissions on folders
Change Permission: "C:\Siemens\Common\": USERS RWX
Change Permission: "C:\Archivos de programa\Siemens\Plcsim\": USERS RWX
Change Permissions End


WriteRegistryValues
 
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\PLCSIM(RFC 1006)\NDi] "DescTextJ" = "PLCSIM
 
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\PLCSIM(ISO)\NDi] "DescTextJ" = "PLCSIM
 
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PLCSIM(Local)\Ndi] "DescTextJ" = "PLCSIM
 
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PLCSIM(PROFIBUS)\NDi] "DescTextJ" = "PLCSIM
 
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PLCSIM(MPI)\NDi] "DescTextJ" = "PLCSIM
 
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIEA085] "DescTextJ" = "PLC


 Custom: ProcessAfterdataMove
write language information to registry
Inst Languages: GERMAN,ENGLISH,FRENCH,SPANISH,ITALIAN
Start Language: SPANISH


[CompSetup Install SharedComponentsBefore]: Collect and prepare Installation of component setups (with older version):
Performing Scan Components...
Property REINSTALL: 
Property REINSTALLMODE: 
Property ADS_OLDDB: 
SourceDir: \\perseo\F\SIMATIC Software\S7-Plcsim\DISK1\
ProductCode of client: {B440401C-4804-4F2D-998C-ACF5FC83DA5F}
 SetupLanguage of client: 1034
Read section: SharedComponentsBefore
Clientname: PLCSim_{B440401C-4804-4F2D-998C-ACF5FC83DA5F}
FeatureName for Component Simatic_Device_Drivers is empty
Found Component Simatic_Device_Drivers
 [SharedComponentsBefore]ComponentName1=Simatic_Device_Drivers
 Msi component detected (to install): simatic device drivers.msi

Performing Install Components...
 Install Component: SIMATIC Device Drivers
 Component Logfile (create/append): C:\WINDOWS\S7DOS_LOG.TXT
 IsInstalled: 2, MsiCompInstalled: -1
Test for Reinstall: Is Msi CompSetup..
 Test for Reinstall: Is installed..
 !! Component reinstalled with 'REINSTALL=ALL': Simatic_Device_Drivers
 IsInstalled: 2, MsiCompInstalled: -1
(InstalledVers >= ToInstallVers ;;; bOverWriteSameRel nicht gesetzt)
 Newer component release installed: K07.01.02.00_01.01.00.01 - actual release of this setup: V07.00.00.00_01.10.00.01
Installation skipped without starting Windows Installer: Only new client entries will be noted. OK.
[CompSetup Install  SharedComponentsBefore]: -- End of section



Process after first component installation
[RegisterFiles]:
Process after first component installation End

    Run StartApplAfter

StartApplAfter


[CompSetup Install SharedComponentsAfter]: Collect and prepare Installation of component setups (with older version):
Performing Scan Components...
Property REINSTALL: 
Property REINSTALLMODE: 
Property ADS_OLDDB: 
SourceDir: \\perseo\F\SIMATIC Software\S7-Plcsim\DISK1\
ProductCode of client: {B440401C-4804-4F2D-998C-ACF5FC83DA5F}
 SetupLanguage of client: 1034
Read section: SharedComponentsAfter
Clientname: PLCSim_{B440401C-4804-4F2D-998C-ACF5FC83DA5F}

Performing Install Components...
[CompSetup Install  SharedComponentsAfter]: -- End of section



Process after second component installation

DeleteFilesAtEnd
File deleted: C:\Archivos de programa\Siemens\Plcsim\s7wsi\archive\sicreate.dir
File deleted: C:\Archivos de programa\Siemens\Plcsim\s7wsi\events\sicreate.dir
delete file failed: C:\WINDOWS\System32\s7wsilrx.dll, return: 2

Paraconfiguration

ParaSection: Para
 Setup key = SOFTWARE\SIEMENS\STEP7\2.0\APPLICATIONS\S7WSAAPX\General\Setup
Application to be started: C:\Archivos de programa\Siemens\Plcsim\s7wsi\s7mklink.exe
ChangeWorkingDirectory to: C:\Archivos de programa\Siemens\Plcsim\s7wsi
Start Para File: (return=0) C:\Archivos de programa\Siemens\Plcsim\s7wsi\s7mklink.exe  "C:\Archivos de programa\Siemens\Plcsim\s7wsi\archive" "C:\Documents and Settings\All Users\Datos de programa\\Siemens\Automation\PLCSIM\s7wsi\archive" "C:\Documents and Settings\All Users\Datos de programa\\Siemens\Automation\Logfiles\Setup\S7WSILOG.TXT"
Application to be started: C:\Archivos de programa\Siemens\Plcsim\s7wsi\s7mklink.exe
ChangeWorkingDirectory to: C:\Archivos de programa\Siemens\Plcsim\s7wsi
Start Para File: (return=0) C:\Archivos de programa\Siemens\Plcsim\s7wsi\s7mklink.exe  "C:\Archivos de programa\Siemens\Plcsim\s7wsi\events" "C:\Documents and Settings\All Users\Datos de programa\\Siemens\Automation\PLCSIM\s7wsi\events" "C:\Documents and Settings\All Users\Datos de programa\\Siemens\Automation\Logfiles\Setup\S7WSILOG.TXT"
Application to be started: C:\Archivos de programa\Siemens\Plcsim\s7wsi\s7mklink.exe
ChangeWorkingDirectory to: C:\Archivos de programa\Siemens\Plcsim\s7wsi
Start Para File: (return=0) C:\Archivos de programa\Siemens\Plcsim\s7wsi\s7mklink.exe  "C:\Archivos de programa\Siemens\Plcsim\s7wsi\TempWAF" "C:\Documents and Settings\All Users\Datos de programa\\Siemens\Automation\PLCSIM\s7wsi\TempWAF" "C:\Documents and Settings\All Users\Datos de programa\\Siemens\Automation\Logfiles\Setup\S7WSILOG.TXT"
reboot needed from ini-file
Write Result to OPFile
Write ReplaceInUseFiles="" Reboot=
Write RebootRequested=1 to OPFile
Section [Results]: SetupSucceeded written to C:\DOCUME~1\ww\CONFIG~1\Temp\OPFILE.TXT
Write LicenseRequested="1"
Remove old Deinst_SP-Keys 
Process after second component installation End

Citamisfile: C:\WINDOWS\\citamis.str
Eintrag in Citamisfile: ----> Done Product SIMATIC S7-PLCSIM Professional     Version: V5.4;03-06-2007;15:28:30


** Error(s): 0 Warning(s): 0
Componentsetup Errors (not succeeded): 0 (of total count:1)

End of installation. 

Logfile closed: 3-6-2007, 15:28:30
***************************
_ADS_initSuite
Ini File not found, extract
Windows Suite: Embedded
Windows Suite: not Embedded
***  SETUP LOGFILE ***

Filename:        S7WSILOG.TXT
Setup Source Version:   K03.01.00.05_11.01.00.04
SetupMasterFrame Name:   Product_Masterframe
Install Start:   1-3-2007, 13:54:53

    ProductName: 'SIMATIC S7-PLCSIM'
    Release: 'V05.04.00.00_04.25.00.01'
    Physical memory [MB]: '2046'
    Free virtual memory [MB]: '2234'
    Property 'Installed'; '2007/09/14 11:53:18'
    Property 'REINSTALLMODE'; ''
    Upgrade: Installed Product: 'S7-PLCSIM Professional Edition 2006 SR3'
    SharedPath: 'C:\Siemens\Common\'
    Default Destination: 'C:\Archivos de programa\Siemens\Plcsim'
    Property 'DATABASE'; 'C:\WINDOWS\Installer\22b95.msi'
    Property 'OriginalDatabase'; 'C:\WINDOWS\Installer\22b95.msi'
    REBOOTFILE= 
    COMMANDLINE= 
Stream out ini file

    Function DetermineShortCutValues
    Language ID: 1034

Set Directories

Get COMMONDIR from INSTALLDIR
CommonDir found in Registry
Set COMMONDIR to C:\Siemens\Common\
Actual ConnPath: C:\Siemens\Documentacin\
Actual StartEntry: Documentacin
Set MANUALCONNDIR to C:\Siemens\Documentacin\
Set MANUALSTARTENTRY to Documentacin
Set MANUALSTARTDIR to C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Documentacin
Actual ConnPath: C:\Siemens\Indicaciones relativas al producto\
Actual StartEntry: Indicaciones relativas al producto
Set READMECONNDIR to C:\Siemens\Indicaciones relativas al producto\
Set READMESTARTENTRY to Indicaciones relativas al producto
Set READMESTARTDIR to C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Indicaciones relativas al producto
Set SIEMENSMENUFOLDER to: C:\Documents and Settings\All Users\Men Inicio\
Set Directories End

    Set Properties for Directories whithout slash
    Function DeleteShortCutsLangUnused
    Language ID: 1034
    init installed language
Get Features

Select language features
    Selected Startlanguage: SPANISH
Citamisfile: C:\WINDOWS\\citamis.str
Eintrag in Citamisfile: 
Deinst SIMATIC S7-PLCSIM     Version: V5.4     Release: V05.04.00.00_04.25.00.01;    01-03-2007;13:54:57

    Run StartApplBefore

StartApplBefore
    Application to start: , StartAt = DRM
    Ini_StartAppl at Remove
    Application to start 2 : C:\WINDOWS\System32\regedit.exe, StartAt = DRM
    Shall start regedit.exe in C:\WINDOWS\System32\
    ChangeDirectory to C:\Archivos de programa\Siemens\Plcsim\s7wsi for regedit.exe in C:\WINDOWS\System32\
  ** INFO: Could not find application regedit.exe in C:\WINDOWS\System32\
  ** INFO: Perhaps product is not installed!
    Application to start: C:\WINDOWS\System32\regedit.exe, StartAt = 

Process before uninstallation
UnRegisterFiles:
Process before uninstallation End

    Run PreUIStartAppl

PreUIStartAppl


[CompSetup Deinstall SharedComponentsAfter]: Uninstall component setups during product uninstallation: 
Performing Scan Components...
 SetupLanguage of client: 1034
Clientname: PLCSim_{B440401C-4804-4F2D-998C-ACF5FC83DA5F}

 Performing Deinstall Components...
[CompSetup Deinstall SharedComponentsAfter]: -- End of section



Prepare UnzipFile: write informations for installation to ini-file
Prepare UnzipFiles End

Init AUTSW Structure
    AUTSW Key Name:PLCSim
    AUTSW Corr:V5.4.0.0
    AUTSW Release:V05.04.00.00_04.25.00.01
    AUTSW TechnVersion:V5.4.0.0
    AUTSW Version:5.4
    AUTSW VersionString:V5.4
    AUTSW ProdCopyright:1997-2007
    AUTSW MainFile:[INSTALLDIR]s7wsi\S7wsaapx.exe
    AUTSW Path:C:\Archivos de programa\Siemens\Plcsim\
    AUTSW ProdGroup:S7
    AUTSW ProdName:S7-PLCSIM
    AUTSW ProdType:NORMAL
    AUTSW RegPath:SIEMENS\STEP7\2.0\APPLICATIONS\S7WSAAPX
    __________________________________
    Process Before DataMove Uninst
    Change Attribut
    Uninstall: Process After DataMove Uninstall
    
    Zip_DeleteSamples
    Reading from section UNZIP

Delete AUTSW Key
Save actual AUTSW-Informations for Rollback
    AUTSW-Key Allready exists, save actual Informations for Rollback
    Actual Corr Version: V5.4.0.0
    Actual MainFile: C:\Archivos de programa\Siemens\Plcsim\s7wsi\S7wsaapx.exe
    Actual Path: C:\Archivos de programa\Siemens\Plcsim
    Actual ProdCopyright: 1997-2007
    Actual ProdGroup: S7
    Actual ProdName: S7-PLCSIM Professional Edition 2006 SR3
    Actual ProdType: PROFESSIONAL
    Actual RegPath: SIEMENS\STEP7\2.0\APPLICATIONS\S7WSAAPX
    Actual Release: V05.04.00.00_04.25.00.01
    Actual TechnVersion: V5.4.0.0
    Actual Version: 5.4
    Actual VersionString: V5.4
    Key deleted
    UNINSTALL: SharedPath already existed, should not be deleted
    Delete language folder for documentation shortcuts
    ReadmeConnDir: C:\Siemens\Indicaciones relativas al producto\
    ReadmeStartDir: C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Indicaciones relativas al producto
    Delete Shortcut to Readme Folder: Japanisch
    Delete Shortcut to Readme Folder: Chinesisch
    ManualConnDir: C:\Siemens\Documentacin\
    ManualStartDir: C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Documentacin
    Delete Shortcut to Documentation Folder: Japanisch
    Delete Shortcut to Documentation Folder: Chinesisch

WriteRegistryValues
 
Component not selected (2)
 
Component not selected (2)
 
Component not selected (2)
 
Component not selected (2)
 
Component not selected (2)
 
Component not selected (2)


[CompSetup Deinstall SharedComponentsBefore]: Uninstall component setups during product uninstallation: 
Performing Scan Components...
 SetupLanguage of client: 1034
Clientname: PLCSim_{B440401C-4804-4F2D-998C-ACF5FC83DA5F}
 Found Component: Simatic_Device_Drivers
RegKey: S7DOS

 Performing Deinstall Components...

 Preparing Deinstall Component: S7DOS
 Uninstall section:
 IsInstalled: 2, MsiCompInstalled: -1
 MSI component detected (MSI-Productkey found)
 Searching for --PLCSim_{B440401C-4804-4F2D-998C-ACF5FC83DA5F}--
 Software\Siemens\Shared Tools\S7DOS\Clients clients: count=2, I am in Clients=YES
[CompSetup Deinstall SharedComponentsBefore]: -- End of section



Deinstallation: Result
Process after uninstallation
Erase files and dirs after deinstall
Process after uninstallation End
Citamisfile: C:\WINDOWS\\citamis.str
Eintrag in Citamisfile: ----> Done Deinst SIMATIC S7-PLCSIM     Version: V5.4;01-03-2007;13:55:05


** Error(s): 0 Warning(s): 2
Componentsetup Errors (not succeeded): 0 (of total count:0)

End of installation. 

Logfile closed: 1-3-2007, 13:55:05
***************************
